< Previous
Next >
PURGE SOLENOID VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.0]
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the seal cover. (See SEAL COVER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
1 |
Purge solenoid valve connector |
2 |
Vacuum hose |
3 |
Purge solenoid valve |
4 |
Bracket |
5 |
Evaporative hose No.1 |
6 |
Catch tank |
Evaporative Hose No.1 Installation Note
1. Install the evaporative hose No.1 as shown in the figure.
Vacuum Hose Installation Note
1. Install the vacuum hose as shown in the figure.< Previous Next >