< Previous
Next >
TIRE PRESSURE MONITORING SYSTEM SET SWITCH INSPECTION
NOTE:
The Tire Pressure Monitoring System (TPMS) set switch is integrated with the cluster switch.
If the Tire Pressure Monitoring System (TPMS) set switch is replaced, replace the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)
1. Remove the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)
2. Measure the resistance between cluster switches B and C under the following conditions:< Previous Next >
If not within the specification, replace the cluster switch.
Resistance with Tire Pressure Monitoring System (TPMS) set switch pressed and held (standard)
187.61—191.39 ohms
Resistance with any switches not pressed (standard)
1,139.99—1,163.01 ohms