< Previous
Next >
DSC OFF SWITCH INSPECTION
NOTE:
The DSC OFF switch is integrated with the cluster switch.
If the DSC OFF switch is replaced, replace the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)
1. Remove the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)
2. Measure the resistance between cluster switches B and C under the following conditions:< Previous Next >
If not within the specification, replace the cluster switch.
Resistance with DSC OFF switch pressed and held (standard)
0 ohm
Resistance with any switches not pressed (standard)
1,139.99—1,163.01 ohms