Knowledge Base

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5
Home

 

< Previous   Next >

ON-BOARD DIAGNOSTIC SYSTEM SIMULATION INSPECTION [TCM (SJ6A-EL)]

1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
a. Select “Data Logger”.
b. Select “Modules”.
c. Select “TCM”.
3. Select the simulation items from the PID table.
4. Perform the active command modes function, inspect the operations for each part.

  • If the operation of output parts cannot be verified after the active command mode inspection is performed, this could indicate the possibility of an open or short circuit, sticking, or operation malfunction in the output parts.

Simulation item table

Item

Output part name

Unit/Condition

Operation condition

SLT

Line pressure control solenoid

A

Ignition is switched ON (engine off or on)

SS_ON-OFF1

Shift solenoid A

Off/On

Ignition is switched ON (engine off or on)

SS_ON-OFF2

Shift solenoid B

Off/On

Ignition is switched ON (engine off or on)

SS_ON-OFF3

Shift solenoid C

Off/On

Ignition is switched ON (engine off or on)

SS_ON-OFF4

Shift solenoid D

Off/On

Ignition is switched ON (engine off or on)

SS_ON-OFF5

Shift solenoid E

Off/On

Ignition is switched ON (engine off or on)

SSA_CC

Shift solenoid F

A

Ignition is switched ON (engine off or on)

SSB_CC

Shift solenoid G

A

Ignition is switched ON (engine off or on)

SSLU_C

TCC control solenoid

A

Ignition is switched ON (engine off or on)

TCC_DC

TCC control solenoid

—

Ignition is switched ON (engine off or on)
< Previous   Next >
 

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5

COPYRIGHT NOTICE:
This fan site is not affiliated with Mazda, and is intended for personal, or commercial use only. The content of our web pages is for general information purposes only and is presented “as is”. We give no assurance or warranty regarding the accuracy of the contents. Readers should do their due diligence and seek the advice of an appropriately certified automotive technician before attempting any steps on this site. Original content provided by Mazda North America. The content of the manual is copyright under DMCA to: full.metal.resistor@gmail.com
LIMITATION OF LIABILITY:
We accept no responsibility for errors, inaccuracies, or omissions found on these pages. Additionally, we hereby exclude liability for any demands, claims, damages or losses of any kind with regard to any content or information provided on our web-site, including but not limited to incidental or consequential damages, direct or indirect loss, compensatory damages, loss of profits, or otherwise. By using this manual you assume full liablity for any procedures carried out on your vehicle, and are responsible for the vehicle remaining road legal and safe.