< Previous
Next >
POWER WINDOW SYSTEM INITIALIZATION PROCEDURE
NOTE:
Initial setting must be performed after performing any of the following procedures.
Power window main switch is replaced
Power window subswitch is replaced
Door glass is removed
Power window regulator is removed
Power window motor is removed
1. Close the door.
2. Close the convertible top and secure the top lock.
3. Switch the ignition ON. (engine on or off)
4. Operate the power window main switch (LH) on the power window main switch to fully open the door glass (driver-side).
5. Operate the power window main switch (LH) on the power window main switch and keep the door glass (driver-side) fully closed for approx. 2 sec.
6. Operate the power window main switch (RH) or the power window subswitch to fully open the door glass. (passenger-side)
7. Operate the power window main switch (RH) or the power window subswitch and keep the door glass (passenger-side) fully closed for approx. 2 sec.< Previous Next >