Knowledge Base

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5
Home

 

< Previous   Next >

CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE

Door Locks Systems

1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Vehicle] on the center display.
4. Select [Door Lock] on the center display.
5. Select an item name, and then select option.
Power Door Lock System

Display of center display

Function

Initial setting

Settings

Control module

Auto Door Lock Mode

Auto door lock function can be changed.

Lock: When Driving, Unlock: IGN Off

Off / Lock: When Driving, Unlock: In Park / Lock: When Driving / Lock: When Driving, Unlock: IGN Off / Lock: Shifting from Park / Lock: Shifting from Park, Unlock: In Park

BCM

Unlock Mode

2-step unlocking system can be set.

Once Driver's, Twice: All Doors

Once: ALL Doors / Once Driver's, Twice: All Doors

BCM

Reset

Returns the setting content of the door lock system to the initial setting.

No

No / Yes

  • Start stop unit

  • BCM
Advanced keyless entry system

Display of center display

Function

Initial setting

Settings

Control module

Keyless Lock Beep Volume

The keyless beeper volume can be adjusted.

Medium

High / Medium / Low / Off

Start stop unit

Auto Relock Time

The operation start time of the auto re-lock function can be changed.

60 seconds

30 seconds / 60 seconds / 90 seconds

Start stop unit

Walk Away Lock

The out-of-area (reception area) type auto lock function can be set.

Off

Off / On

Start stop unit

Reset

Returns the setting content of the door lock system to the initial setting.

No

No / Yes

  • Start stop unit

  • BCM
Keyless entry system

Display of center display

Function

Initial setting

Settings

Control module

Auto Relock Time

The operation start time of the auto re-lock function can be changed.

60 seconds

30 seconds / 60 seconds / 90 seconds

Start stop unit

Reset

Returns the setting content of the door lock system to the initial setting.

No

No / Yes

  • Start stop unit

  • BCM

Lighting Systems

1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Vehicle] on the center display.
4. Select [Lighting] on the center display.
5. Select an item name, and then select option.
Room light control system

Display of center display

Function

Initial setting

Settings

Control module

Interior Light Timeout - Doors Open

  • The map light illumination time after any door is opened can be changed.

  • The trunk compartment light illumination time after the trunk lid is opened can be changed.

30 minutes

60 minutes / 30 minutes / 10 minutes

BCM

Interior Light Timeout - Doors Closed

The map light illumination time after all the doors are closed can be changed.

15 seconds

60 seconds / 30 seconds / 15 seconds / 7.5 seconds

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

  • BCM

  • FSC

  • Instrument cluster

  • Adaptive front lighting system (AFS) control module
High beam control (HBC) system

Display of center display

Function

Initial setting

Settings

Control module

High Beam Control

The high beam control (HBC) system can be switched between operable and inoperable.

On

On / Off

FSC

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

  • BCM

  • FSC

  • Instrument cluster

  • Adaptive front lighting system (AFS) control module
Adaptive front lighting system (AFS)

Display of center display

Function

Initial setting

Settings

Control module

Adaptive Front-lighting System

The adaptive front lighting system (AFS) can be switched between operable and inoperable.

On

On / Off

Adaptive front lighting system (AFS) control module

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

  • BCM

  • FSC

  • Instrument cluster

  • Adaptive front lighting system (AFS) control module
Lights-on reminder warning alarm

Display of center display

Function

Initial setting

Settings

Control module

Light On Reminder Vol

The volume for the lights-on reminder warning alarm can be changed.

Off

High / Low / Off

Instrument cluster

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

  • BCM

  • FSC

  • Instrument cluster

  • Adaptive front lighting system (AFS) control module
Daytime running light (DRL) system (except canada)

Display of center display

Function

Initial setting

Settings

Control module

Daytime Running Lights

The DRL system function can be set.

On

On / Off

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

  • BCM

  • FSC

  • Instrument cluster

  • Adaptive front lighting system (AFS) control module
Auto light system

Display of center display

Function

Initial setting

Settings

Control module

Auto Headlight On

Auto light sensitivity can be changed.

Medium

Light / Medium Light / Medium / Medium Dark / Dark

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

  • BCM

  • FSC

  • Instrument cluster

  • Adaptive front lighting system (AFS) control module
Auto light-off system

Display of center display

Function

Initial setting

Settings

Control module

Headlight Off Timer

The headlight emitted time of the auto light off timer can be changed.

30 seconds

120 seconds / 90 seconds / 60 seconds / 30 seconds / Off

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

  • BCM

  • FSC

  • Instrument cluster

  • Adaptive front lighting system (AFS) control module
Coming home light system

Display of center display

Function

Initial setting

Settings

Control module

Coming Home Lights Timer

The coming home light system operation time can be switched.

30 seconds

Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

  • BCM

  • FSC

  • Instrument cluster

  • Adaptive front lighting system (AFS) control module
Leaving home light system

Display of center display

Function

Initial setting

Settings

Control module

Leaving Home Lights

The leaving home light system can be switched between operable and inoperable.

On

On / Off

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

  • BCM

  • FSC

  • Instrument cluster

  • Adaptive front lighting system (AFS) control module

Auto Wiper System

1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Vehicle] on the center display.
4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Rain Sensing Wiper

The auto wiper function can be disabled.

On

On / Off*1

BCM
*1
If the function is set to “Off”, the wipers will operate intermittently with the wiper switch in AUTO position.

Blind Spot Monitoring (BSM) System

1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Safety] on the center display.
4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Blind Spot Monitor Volume

The volume of the blind spot monitoring (BSM) warning alarm can be changed.

High

High / Low / Off

Instrument cluster

Lane Departure Warning System (LDWS)

1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Safety] on the center display.
4. Select [Lane Departure Warning System] on the center display.
5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Timing

The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.

Before Line

At Line / Before Line

FSC

Warning

The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.

Low

High / Low

FSC

Sound

The type of the LDWS warning alarm can be changed.

Beep

Beep / Rumble

Instrument cluster

Beep Volume

The volume of the LDWS warning alarm (Beep) can be changed.

High

High / Low

Instrument cluster

Rumble Strip Volume

The volume of the LDWS warning alarm (Rumble) can be changed.

High

High / Mid / Low

Instrument cluster

Reset

Returns the setting content of the lane departure warning system to the initial setting.

No

No / Yes

  • FSC

  • Instrument cluster

Turn Light System

1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Vehicle] on the center display.
4. Select [Turn] on the center display.
5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

3-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

On

On / Off

BCM

Turn Signal Volume

The volume of the turn and hazard indicator alarm can be changed.

Low

High / Low

Instrument cluster

Reset

Returns the setting content of the turn light system to the initial setting.

No

No / Yes

  • BCM

  • Instrument cluster

Language

1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [System] on the center display.
4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Language

The display language can be changed.

US English

US English / Spanish / Canadian French

Connectivity master unit (CMU)

Distance

1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [System] on the center display.
4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Distance

The distance unit can be changed.

Miles or km*1

Miles / km

Instrument cluster
*1
The initial value differs depending on the market.

Temperature

1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [System] on the center display.
4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Temp*1

The temperature unit can be changed.

°F or °C*2

°F / °C

Instrument cluster
*1
When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.
*2
The initial value differs depending on the market.

Fuel Economy Monitor

1. Switch the ignition ON (engine off or on).
2. Select [Application] on the center display.
3. Select [Fuel economy monitor] on the center display.
4. Press the setting button on the menu screen.
5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Show Screen at Ignition Off

The ending screen of the fuel monitor can be switched between display/non-display.

Off

On / Off

Connectivity master unit (CMU)

Sync Average and Trip A

The function which synchronizes the reset of the fuel reset and trip meters can be switched between on/off.

Off

On / Off

Connectivity master unit (CMU)
< Previous   Next >
 

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5

COPYRIGHT NOTICE:
This fan site is not affiliated with Mazda, and is intended for personal, or commercial use only. The content of our web pages is for general information purposes only and is presented “as is”. We give no assurance or warranty regarding the accuracy of the contents. Readers should do their due diligence and seek the advice of an appropriately certified automotive technician before attempting any steps on this site. Original content provided by Mazda North America. The content of the manual is copyright under DMCA to: full.metal.resistor@gmail.com
LIMITATION OF LIABILITY:
We accept no responsibility for errors, inaccuracies, or omissions found on these pages. Additionally, we hereby exclude liability for any demands, claims, damages or losses of any kind with regard to any content or information provided on our web-site, including but not limited to incidental or consequential damages, direct or indirect loss, compensatory damages, loss of profits, or otherwise. By using this manual you assume full liablity for any procedures carried out on your vehicle, and are responsible for the vehicle remaining road legal and safe.