< Previous
Next >
CHECK VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.0]
U.S.A. and CANADA Specs.
1. Remove the following parts:a. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)b. Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)c. Partition board (See PARTITION BOARD REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
1 |
Breather hose |
2 |
Evaporative hose |
3 |
Check valve |
3. Install in the reverse order of removal.
Evaporative hose installation note
1. Install the evaporative hose as shown in the figure.
Breather hose installation note
1. Install the breather hose as shown in the figure.
Except U.S.A. and CANADA Specs.
1. Remove in the order indicated in the table.
1
Evaporative hose No.2
2
Check valve
2. Install in the reverse order of removal.< Previous Next >