Knowledge Base

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5
Home

 

< Previous   Next >

ENGINE OIL DATA RESET [SKYACTIV-G 2.0]

NOTE:

  • If the engine oil was replaced with the engine oil maintenance monitor function ON, perform the engine oil data reset to reset the engine oil replacement period calculation data recorded in the PCM regardless of whether or not the wrench indicator light is illuminated.

  • The ON/OFF condition of the engine oil maintenance monitor function can be verified using the M-MDS. (See MAINTENANCE MONITOR OPERATION PROCEDURE.)

Engine oil data reset procedure

Step

Inspection

Results

Action

Note

1

  • Using the M-MDS, verify the engine oil maintenance monitor function ON/OFF condition.

  • Is the engine oil maintenance monitor function on?

Yes

Go to the next step.

If the engine oil maintenance monitor function is on, it is necessary to perform the engine oil data reset.

No

The engine oil data reset is unnecessary.

2

  • Switch the ignition ON (engine off) and switch the display using the tripmeter switch to display the odometer.

    CAUTION:

    • The tripmeter and average fuel economy are reset when the following procedures are performed with tripmeter A or B displayed.

  • Switch the ignition OFF (LOCK).

  • Press and hold the tripmeter switch with the ignition switched off, then switch the ignition ON (engine off).

    • Keep pressing the tripmeter switch for more than 5 s.

  • Does the master warning light flash for a few seconds?

Yes

Engine oil data reset is completed.

The master warning light flashes for a few seconds when the engine oil data reset procedure is completed.

No

Perform Step 2 again.
< Previous   Next >
 

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5

COPYRIGHT NOTICE:
This fan site is not affiliated with Mazda, and is intended for personal, or commercial use only. The content of our web pages is for general information purposes only and is presented “as is”. We give no assurance or warranty regarding the accuracy of the contents. Readers should do their due diligence and seek the advice of an appropriately certified automotive technician before attempting any steps on this site. Original content provided by Mazda North America. The content of the manual is copyright under DMCA to: full.metal.resistor@gmail.com
LIMITATION OF LIABILITY:
We accept no responsibility for errors, inaccuracies, or omissions found on these pages. Additionally, we hereby exclude liability for any demands, claims, damages or losses of any kind with regard to any content or information provided on our web-site, including but not limited to incidental or consequential damages, direct or indirect loss, compensatory damages, loss of profits, or otherwise. By using this manual you assume full liablity for any procedures carried out on your vehicle, and are responsible for the vehicle remaining road legal and safe.