i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE
CAUTION:
The personalization feature may not be set correctly if [Not Adopted.] or [Not equipped] is selected in the setting displayed on the M-MDS. Do not select [Not Adopted.] or [Not equipped] in the setting displayed on the M-MDS.
Adaptive Front Lighting System (AFS)
Using M-MDS
1. Connect the M-MDS to the DLC-2.
2. After vehicle identification, select the following from the M-MDS initialization screen.a. “Module programming”b. “Programmable Parameters”
3. Select menu in the “IC”.
4. Select an item name, and than select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Adaptive Front-lighting System |
The adaptive front lighting system (AFS) can be switched between operable and inoperable. |
ON |
OFF / ON |
Adaptive front lighting system (AFS) control module |
Using center display
For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)
Blind Spot Monitoring (BSM) System
Using M-MDS
1. Connect the M-MDS to the DLC-2.
2. After vehicle identification, select the following from the M-MDS initialization screen.a. “Module programming”b. “Programmable Parameters”
3. Select menu in the “IC”.
4. Select an item name, and than select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| BSM Volume. |
The volume of the blind spot monitoring (BSM) warning alarm can be changed. |
High |
OFF / Low / High |
Instrument cluster |
Using center display
For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)
Lane Departure Warning System (LDWS)
Using M-MDS (LDWS timing or LDWS warning)
1. Connect the M-MDS to the DLC-2.
2. After vehicle identification, select the following from the M-MDS initialization screen.a. “Module programming“b. “Programmable Parameters”
3. Select menu in the “FSC”.
4. Select an item name, and than select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| LDWS Timing. |
The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed. |
Late |
Adaptive / Early / Medium / Late |
Forward sensing camera (FSC) |
| LDWS Warning. |
The warning operation sensitivity of the lane departure warning system (LDWS) can be changed. |
Often |
Often / Medium / Rare |
Forward sensing camera (FSC) |
Using M-MDS (LDWS sound)
1. Connect the M-MDS to the DLC-2.
2. After vehicle identification, select the following from the M-MDS initialization screen.a. “Module programming”b. “Programmable Parameters”
3. Select menu in the “IC”.
4. Select an item name, and than select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| LDWS Sound. |
The type of the LDWS warning alarm can be changed. |
Beep |
Beep /Rumble Strip |
Instrument cluster |
| LDWS Volume |
The volume of the LDWS warning alarm can be changed. |
Volume 1 (Except U.S.A. specs.)/ Volume 3 (U.S.A. specs.) |
Volume 1 /Volume 2 /Volume 3 |
Instrument cluster |
Using center display
For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)
High Beam Control (HBC) System
Using M-MDS
1. Connect the M-MDS to the DLC-2.
2. After vehicle identification, select the following from the M-MDS initialization screen.a. “Module programming“b. “Programmable Parameters”
3. Select menu in the “FSC”.
4. Select an item name, and than select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| High Beam Control. |
The high beam control (HBC) system can be switched between operable and inoperable. |
ON |
OFF / ON |
Forward sensing camera (FSC) |
Using center display
< Previous Next >
For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)