< Previous
Next >
TOP LOCK STRIKER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the following parts:a. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)b. Female wedge (See FEMALE WEDGE REMOVAL/INSTALLATION.)c. Front header trim (See FRONT HEADER TRIM REMOVAL/INSTALLATION.)
3. Disconnect the connector.
4. Remove the screws.
5. Remove the top lock striker.
6. Install in the reverse order of removal.
< Previous Next >
When installing the top lock striker installation screws, tighten the screws in the order shown in the figure.