CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE
CAUTION:
The personalization feature may not be set correctly if [Not equipped] is selected in the setting displayed on the M-MDS. Do not select [Not equipped] in the setting displayed on the M-MDS.
NOTE:
Settings of some personalization features displayed on the M-MDS cannot be switched depending on the vehicle specification.
Auto Light-Off System
Using M-MDS
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
Select the "Module Programming".
Select "Programmable Parameters".
Select menu in the BCM.
3. Select an item name, and then select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Headlight Off Timer |
The headlight emitted time of the auto light off timer can be changed. |
30 seconds. |
0 seconds./30 seconds./60 seconds./90 seconds./120 seconds. |
BCM |
Using center display
Auto light system
Using M-MDS
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
Select the "Module Programming".
Select "Programmable Parameters".
Select menu in the BCM.
3. Select an item name, and then select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Auto Headlight On |
Auto light sensitivity can be changed. |
Standard (All Others) |
Extra Low (Except Japan)/Low (All Others)/Standard (All Others)/High (Except Japan)/Extra High (Except Japan) |
BCM |
Using center display
NOTE:
When the system is set to [Extra High] or [High], each light turns on when the ambient light is brighter than when the system is set to [Standard] because the illumination level required to turn on the headlights LO, TNS and panel light increases. When the system is set to "Extra Low" or "Low", because the illumination level required to turn on the headlights LO, TNS and panel light decreases, each light turns on when the ambient light is darker than when the system is set to "Standard".
The personalization feature may not be set correctly if [Jpan Only] such as [Extra High (Jpan Only)] is selected. Do not select [Jpan Only].
Turn light system
Using M-MDS
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
Select the "Module Programming".
Select "Programmable Parameters".
Select menu in the BCM.
3. Select an item name, and then select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Three-Flash Turn Signal |
The turn light system can be switched between operable and inoperable. |
On |
Off/On |
BCM |
Using center display
Coming Home Light System
Using M-MDS
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
Select the "Module Programming".
Select "Programmable Parameters".
Select menu in the BCM.
3. Select an item name, and then select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Coming Home Light operation time |
The coming home light system operation time can be switched. |
30 seconds. |
0 seconds./30 seconds./60 seconds./90 seconds./120 seconds. |
BCM |
Using center display
Leaving Home Light System
Using M-MDS
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
Select the "Module Programming".
Select "Programmable Parameters".
Select menu in the BCM.
3. Select an item name, and then select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Leaving Home Light system |
The leaving home light system can be switched between operable and inoperable. |
On |
Off/On |
BCM |
Using center display
Room light control system
Using M-MDS
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
Select the "Module Programming".
Select "Programmable Parameters".
Select menu in the BCM.
3. Select an item name, and then select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Interior Light Timeout-Door Open. |
The map light illumination time after a door is opened can be changed. |
30 minutes. |
30 minutes./ 60 minutes./10 minutes. |
BCM |
| Interior Lighting Timeout-Door Closed |
The map light illumination time after all doors are closed can be changed. |
15 seconds. |
15 seconds./7.5 seconds./30 seconds./60 seconds. |
BCM |
Using center display
Auto wiper system
Using M-MDS
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
Select the "Module Programming".
Select "Programmable Parameters".
Select menu in the BCM.
3. Select an item name, and then select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Auto Wiper |
The auto wiper function can be disabled. |
On (Rain Sensing) |
On (Rain Sensing)/Off (Intermittent)*1 |
BCM |
- *1
- When the system is set to [Off (Intermittent)] and the windshield wiper switch is in the AUTO position, the windshield wipers operate intermittently.
Using center display
Power Door Lock System
Using M-MDS
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
Select the "Module Programming".
Select "Programmable Parameters".
Select menu in the BCM.
3. Select an item name, and then select option.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Auto Door Lock Mode |
Auto door lock function can be changed. |
Lock: Driving, Unlock: IGN Off. |
Off/Lock: When Driving, Unlock: In Park./Lock When Driving./Lock: Driving, Unlock: IGN Off./Lock When Shifting Out Of P./Lock: Shift From P, Unlock: In P. |
BCM |
Using center display
Setting method by operation of door lock switch
The following setting can be changed by operation of the door lock switch.
| M-MDS display |
Function |
Initial setting |
Setting contents |
Control unit |
| Auto Door Lock Mode |
Auto door lock function can be changed. |
Lock: Driving, Unlock: IGN Off. |
Off/Lock: When Driving, Unlock: In Park./Lock When Driving./Lock: Driving, Unlock: IGN Off./Lock When Shifting Out Of P./Lock: Shift From P, Unlock: In P. |
BCM |
Change the setting for the auto door lock referring to the following procedure:
NOTE:
If any of the following conditions is met during procedure, the setting change for the auto door lock is stopped.
Lock side of the door lock switch is pressed while in the personalization mode.
Unlock side of the door lock switch is pressed 7 times while in the personalization mode. (AT)
Unlock side of the door lock switch is pressed 4 times while in the personalization mode. (MT)
